Surge Protective Capacitors
Surge Protective Capacitors

We are Manufacturer & Exporter of Surge Absorbing / Protective Capacitor. This product is used to protect generator and heavy motor from intern fault. SHARDA’s surge protection capacitors are special types of capacitors. Its application is of a specialized nature i.e. in case of abnormal condition.

learn more
High Voltage Capacitor
High Voltage Capacitor

Sharda is producing power compensation capacitors since 20 years with fully technically & Experienced workmanship, new advanced machinery

learn more
Casting Products Industry
Low Voltage MPP Capacitor

The construction of this type of capacitor is like having one sheet of Polypropylene Film in which an upper part is metalized with aluminum (Al) or zinc (Zn) with standard thickness having 0.2μm.

learn more
Global Energy Market Supplier
Capacitor Bank

SHARDA ELECTRONICS & CO. is a manufacturer of Capacitor Bank with associated Equipment's

learn more
The Future GPI
Customer Relationship

Customer Relationship Building - A Key to Our Success To our customers we offer a near endless stream of support. It is our goal to keep our customers up and running.

learn more

The Role of Capacitors

 
What is Power Factor ?
 
Power factor is the relationship between working (active) power and total power consumed (apparent power). Essentially, power factor is a measurement of how effectively electrical power is being used. The higher the power factor, the more effectively electrical power is being used.

A distribution system's operating power is composed of two parts: Active (working) power and reactive (non-working magnetizing) power. The ACTIVE power performs the useful work - the REACTIVE power does not. It's only function is to develop magnetic fields required by inductive devices.
 
Why Improve Low Power Factor ?
 
Low power factor means poor electrical efficiency. The lower the power factor, the higher the apparent power drawn from the distribution network.

When low power factor is not corrected, the utility must provide the nonworking reactive power in addition to the working active power. This results in the use of larger generators, transformers, bus bars, wires, and other distribution system devices that otherwise would not be necessary.

As the utility's capital expenditures and operating costs are going to be higher, they are going to pass these higher expenses to industrial users in the form of power factor penalties and higher utility bills.
 
Benefit of power factor Improvement :
1) Reduction In kvar Demand
2) Decreased electrical equipment cost
3) Decreased energy charges
4) Decreased Power losses
5) No penalties
6) Incentive in electricity bills
7) Reduce heat loss of transformers and distribution equipment
8) Prolong the life of distribution equipment
9) Stabilizes voltage levels
10) Increase your system's capacity, etc.
 
Calculation of kvar required for industries & distribution networks
Initial PF Target PF
  0.90 0.91 0.92 0.93 0.94 0.95 0.96 0.97 0.98 0.99
0.4 1.807 1.836 1.865 1.896 1.928 1.963 2.000 0.97 2.041 1.910
0.42 1.676 1.705 1.735 1.766 1.798 1.832 1.749 1.790 1.680 1.577
0.44 1.557 1.585 1.615 1.646 1.678 1.712 1.639 1.481 1.392 1.308
0.46 1.446 1.475 1.504 1.535 1.567 1.602 1.536 1.229 1.154 1.083
0.48 1.343 1.372 1.402 1.432 1.465 1.499 1.440 1.015 0.950 0.888
0.5 1.248 1.276 1.306 1.337 1.369 1.403 1.351 0.828 0.770 0.713
0.52 1.158 1.187 1.217 1.247 1.280 1.314 1.267 0.658 0.631 0.605
0.54 1.074 1.103 1.133 1.163 1.196 1.230 1.188 0.552 0.499 0.447
0.56 0.995 1.024 1.053 1.084 1.116 1.151 1.113 0.395 0.369 0.343
0.58 0.920 0.949 0.979 1.009 1.042 1.076 1.042 0.316 0.289 0.262
0.6 0.849 0.878 0.907 0.938 0.970 1.005 0.974 0.234 0.253 0.175
0.62 0.781 0.810 0.839 0.870 0.903 0.937 0.909 0.145 0.112 0.078
0.64 0.716 0.745 0.775 0.805 0.838 0.872 0.847 0.98 2.088 1.958
0.66 0.654 0.683 0.712 0.743 0.775 0.810 0.787 1.838 1.727 1.625
0.68 0.594 0.623 0.652 0.683 0.715 0.750 0.729 1.529 1.440 1.356
0.7 0.536 0.565 0.594 0.625 0.657 0.692 0.672 1.276 1.201 1.130
0.72 0.480 0.508 0.538 0.569 0.061 0.635 0.617 1.062 0.998 0.935
0.74 0.425 0.453 0.483 0.514 0.546 0.580 0.590 0.875 0.817 0.761
0.75 0.380 0.426 0.456 0.487 0.519 0.553 0.706 0.679 0.652 0.706
0.76 0.371 0.400 0.429 0.460 0.492 0.526 0.563 0.699 0.547 0.495
0.78 0.318 0.347 0.376 0.407 0.439 0.474 0.511 0.443 0.417 0.390
0.8 0.266 0.294 0.324 0.355 0.387 0.421 0.458 0.364 0.337 0.309
0.82 0.214 0.242 0.272 0.303 0.335 0.369 0.406 0.281 0.313 0.223
0.84 0.162 0.190 0.220 0.251 0.283 0.317 0.354 0.192 0.160 0.126
0.85 0.135 0.164 0.194 0.225 0.257 0.291 0.328 0.99 2.149 2.018
0.86 0.109 0.138 0.167 0.198 0.230 0.265 0.302 1.898 1.788 1.685
0.87 0.082 0.111 0.141 0.172 0.204 0.238 0.275 1.590 1.500 1.416
0.88 0.055 0.084 0.114 0.145 0.177 0.211 0.248 1.337 1.262 1.191
0.89 0.028 0.057 0.086 0.117 0.149 0.184 0.221 1.123 1.058 0.996
0.9   0.029 0.058 0.089 0.121 0.156 0.193 0.936 0.878 0.821
0.91   0.030 0.060 0.093 0.127 0.164 0.205 0.766 0.739 0.713
0.92       0.031 0.063 0.097 0.134 0.660 0.608 0.556
0.93         0.032 0.067 0.104 0.503 0.477 0.451
0.94           0.034 0.071 0.424 0.397 0.370
0.95             0.037 0.342 0.313 0.284
 
The Role of Capacitors
 
How Power Factor Correction Capacitors Solve the Problem of Low Power Factor.

Low power factor is a problem that can be solved by adding power factor correction capacitors to the plant distribution system. Correction capacitors work as reactive current generators “providing” needed reactive power (kvar) into the power supply. By supplying their own source of reactive power, the industrial user frees the utility from having to supply it, therefore, the total amount of apparent power supplied by the utility will be less.
Role of Capacitors
Power factor correction capacitors reduce the total current drawn from the distribution system and subsequently increase system capacity by raising the power factor level.
 
Capacitor Ratings
Power factor correction capacitors are rated in electrical units called “Vars”. One Var is equivalent to one volt-ampere of reactive power. Vars, then, are units of measurement for indicating just how much reactive power the capacitor will supply. As reactive power is usually measured in the thousands of Vars, the letter “k” (abbreviation for kilo”, meaning thousands) precedes the Var creating the more familiar “kVAR” term.The capacitor kVAR rating, then, shows how much reactive power the capacitor will supply. Each unit of the capacitor’s kVAR will decrease the inductive reactive power demand (magnetizing demand) by the same amount
 
EXAMPLE :
A low voltage network requires 410 kW active powers at full load, and the power factor is measured to be .70. Therefore, the system’s full load consumption of apparent power is 579.5 kVA. If 300 kvar of capacitive reactive power is installed, the power factor will rise to .96 and the kVA demand will be reduced from 579.5 to 424.3 kVA.
Role of Capacitors
Capacitor Theme
 
Energy Efficiency The Competitive Edge
The demand for energy is projected to grow twice as fast in Asia as for the rest of the world over the next 20 years. India is projected to claim a significant portion of this Asian demand. However, with a smaller reserve of resources, Electricity prices in Asian Countries are already some of the highest in the world. The per-unit cost in India is almost twice that in Canada. With increasing global competition, countries with higher electricity costs can benefit significantly from improvements in Energy Efficiency. Further, improvements in energy efficiency are already proven to have the fastest payback, compared to improving availability through Generation.
Power Factor (PF) improvement is therefore one of the fastest ways to a better bottom-line.
 
Causes Of Low Power Factor
• Most of the A.C. motors are of induction type which have low lagging power factor.
   These motors work at a power factor is extremely small.
• Arc lamp, electric discharge lamps and industrial heating furnaces operate at low lagging power factor.
• The load on the power system is varying ; being high during morning & evening & low at other times.
  During low load supply voltage increases also magnitude of current increases. This results in the decrease of power factor.
 
Disadvantages Of Low Power Factor
The Power Factor plays an important role in A.C. Circuit since power consumed depends upon this factor.

P = VL x IL x COS(Ф) (For Single Phase)
IL = P/ VL COS(Ø)
P = 1.73 x VL x IL x COS(Ø) (For Three Phase)
IL = P/ 1.73 x VL x COS(Ø)

It is clear from above that for fixed power & voltage the load current is inversely proportional to the power factor. Lower the power factor, higher the load current & vice-versa.

The larger current due to poor power factor result in the following Disadvantages
 
• The KVA rating of equipment is larger. The electric machinery’s are rated in *kVA. kVA = kW/cos(Ф)
• The conductor size. To transmit or fixed amount of power at constant voltage,
  the conductor will have to more current at low power factor.
• Larger copper losses. The large current at low power factor causes more (I²R) losses in all element of the supply.
• Poor voltage regulation.
• Reduce hunting capacity of system.
 
The above discussion indicates that the low power factor is an objective feature in the supply system.
 
The Principle Of Power Factor Compensation
While the ideal Power Factor (PF) is Unity or 1, most Industrial loads have a PF lower than 1. Moreover, this lower PF is usually Inductive, arising out of the windings of Transformers, Motors, etc. These loads consume KVARs (the Watt less component) from the supply line.

The principle of PF Compensation is to supply these KVARs via a capacitor located close to the load, reducing the current drawn from the supply line.
 
Power Factor Improvement
The low lagging power factor is mainly due to the fact that most of the power load is inductive in nature &therefore, take lagging current. In order to improve the power factor, some drive taking leading power factor should be a capacitor. The capacitor draws a leading current & partly neutralizes the lagging reactive power of load current. This raises the power factor of the load.
The devices of Power Factor improvement are as below
1) Static Capacitor.
2) Synchronous condenser.
3) Phase advances.

 
Power Factor Correction Systems- Power Capacitors - An Insight
Power factor Correction is achieved now a days by installing power capacitors . Under fixed load conditions it is possible to put power capacitors in the system which will compensate completely for the wattles component and power factor can be improved to its maximum value. This obviously will not be an exact compensation for loads which are varying in value.
Power factor can be controlled manually or by automatic control systems.

In manual control the operator has to go on making adjustment all the time, which is very tricky and human error cannot be ruled out.
In automatic control, power factor control relay keeps on sensing the power factor all the time and gives suitable signals to contactors connected to it to energize required capacitors.
 
Importance Of Capacitor In Electric Circuit
Power capacitors have been used in many & wide ways in industry from last 40-50 years but its continuous use is often limited by apparent lack of practical application information.

The various applications of capacitors are capacitors for power factor improvement, Series Capacitors in power supply system, surge protection capacitors, Voltage divider Capacitors, Energy Storage Capacitors, Motor Start/Run Capacitors, Fluorescent lighting capacitors, harmonic filter capacitors ,water cooled capacitors etc.

 
Request a Quote
catalog
An ISO 9001 : 2015 Certified Company